|
Conical drive and tension drums, for example for curved or circular
conveyors. These rollers are constructed out of PVC or polyethylene
cylinders with varying exterior diameters. These are glued together
and attached to a thick-walled tube. Then they are turned to produce
a conical shape, entirely according to the client's specifications.
Depending on the thick-walled tube selected, these conical drums
can handle large forces. Can be delivered in bright steel, galvanized
or stainless steel versions, so that it can also be used in the
foodstuffs branch. View
photo
|
|
Conical sleeve
Conicity
Inner radius
Bearing cartridge
Load capacity
Spindle type
|
PVC or polyethylene cylinders
as required; maximum outer diameter ø 250 mm
dependent on the chosen conicity, the length of the roller and the
largest outer diameter
grooved ball bearing 6202, 6003, 6004, 6005, 6204, 6205, 6206
(-z, -zz, -rs, -2rs)
dependent on the chosen roller length, the tube diameter and the
wall thickness
according to customer's specifications
|
